| Item type |
学術雑誌論文 / Journal Article(1) |
| 公開日 |
2015-09-02 |
| タイトル |
|
|
タイトル |
Friction welding of pure titanium and pure nickel |
|
言語 |
en |
| 言語 |
|
|
言語 |
eng |
| キーワード |
|
|
主題Scheme |
Other |
|
主題 |
FRICTION WELDING |
| キーワード |
|
|
主題Scheme |
Other |
|
主題 |
TITANIUM |
| キーワード |
|
|
主題Scheme |
Other |
|
主題 |
NICKEL |
| キーワード |
|
|
主題Scheme |
Other |
|
主題 |
INTERFACE |
| キーワード |
|
|
主題Scheme |
Other |
|
主題 |
INTERLAYER |
| キーワード |
|
|
主題Scheme |
Other |
|
主題 |
INTERMETALLIC COMPOUND |
| 資源タイプ |
|
|
資源 |
http://purl.org/coar/resource_type/c_6501 |
|
タイプ |
journal article |
| アクセス権 |
|
|
アクセス権 |
open access |
|
アクセス権URI |
http://purl.org/coar/access_right/c_abf2 |
| 著者 |
Fuji, A
Horiuchi, Y
Yamamoto, K
|
| 著者別名 |
|
|
|
識別子Scheme |
WEKO |
|
|
識別子 |
41140 |
|
|
姓名 |
冨士, 明良 |
|
|
言語 |
ja |
| 抄録 |
|
|
内容記述タイプ |
Abstract |
|
内容記述 |
The joint tensile strength and metallurgical properties of a friction welded joint of commercially pure Ti and pure Ni has been investigated in as welded and post-weld heat treated conditions. While friction pressure did not significantly impinge on joint tensile strength, joint tensile strength was affected by friction time. A 1?1・5 μm thick interlayer is essential to join pure Ti and pure Ni using friction welding. A maximum joint tensile strength of 450 MPa was achieved and the joint fractured in the Ti original (not heat affected zone) substrate, i.e. the joint efficiency was approximately 112% relative to Ti substrate and 94・5% relative to Ni substrate. The joint tensile strength abruptly decreased as heating temperature was increased to 873 K and/or the Larson-Miller parameter was increased to approximately 19?20 × 103. The joint tensile strength rapidly decreased with increasing interlayer thickness up to approximately 10 μm, and then remained constant for further increase in interlayer thickness. Four layers occurred at the interface of joints heated to more than 873 K, namely Ti2Ni, TiNi, TiNi2, TiNi3. The fracture of heated joints propagated mainly in the Ti2Ni layer and/or at the interface between the TiNi and TiNi3 layers. |
| 書誌情報 |
Science and Technology of Welding and Joining
巻 10,
号 3,
p. 287-294,
発行日 2005-06
|
| DOI |
|
|
|
識別子タイプ |
DOI |
|
|
関連識別子 |
http://doi.org/10.1179/174329305X40598 |
| 出版者 |
|
|
出版者 |
Maney Publishing |
|
言語 |
en |
| 著者版フラグ |
|
|
言語 |
en |
|
値 |
author |
| 出版タイプ |
|
|
出版タイプ |
AM |
|
出版タイプResource |
http://purl.org/coar/version/c_ab4af688f83e57aa |
No.13-Ti.Ni.pdf (676.3 kB)
