| Item type |
学術雑誌論文 / Journal Article(1) |
| 公開日 |
2015-09-01 |
| タイトル |
|
|
タイトル |
Effect of friction welding condition on joining phenomena and joint strength of friction welded joint between brass and low carbon steel |
|
言語 |
en |
| 言語 |
|
|
言語 |
eng |
| キーワード |
|
|
主題Scheme |
Other |
|
主題 |
FRICTION WELDING |
| キーワード |
|
|
主題Scheme |
Other |
|
主題 |
BRASS |
| キーワード |
|
|
主題Scheme |
Other |
|
主題 |
LOW CARBON STEEL |
| キーワード |
|
|
主題Scheme |
Other |
|
主題 |
TRANSFERENCE |
| キーワード |
|
|
主題Scheme |
Other |
|
主題 |
JOINT EFFICIENCY |
| 資源タイプ |
|
|
資源 |
http://purl.org/coar/resource_type/c_6501 |
|
タイプ |
journal article |
| アクセス権 |
|
|
アクセス権 |
open access |
|
アクセス権URI |
http://purl.org/coar/access_right/c_abf2 |
| 著者 |
Kimura, M
Kasuya, K
Kusaka, M
Kaizu, K
Fuji, A
|
| 著者別名 |
|
|
|
識別子Scheme |
WEKO |
|
|
識別子 |
41107 |
|
|
姓名 |
冨士, 明良 |
|
|
言語 |
ja |
| 抄録 |
|
|
内容記述タイプ |
Abstract |
|
内容記述 |
This paper describes the effect of friction welding condition on joining phenomena and joint strength of friction welded joints between copper?zinc alloy (brass) and low carbon steel (LCS). When the joint was made at a friction pressure of 30 MPa with a friction speed of 27・5 s?1, brass transferred to the half radius region of the weld interface on the LCS side. Then, transferred brass extended towards the almost whole weld interface with increasing friction time. The joint efficiency increased with increasing friction time, and then the joint obtained 100% and the brass base metal fracture when the joint was made with a friction time of 4・2 s or longer. However, the fact that all joints had some cracks at the periphery portion of the weld interface was due to a deficiency of transferred brass at the periphery portion on the weld interface of the LCS side. On the other hand, brass transferred to the peripheral region of the weld interface on the LCS side, and then transferred towards the entire weld interface when the joint was made at a friction pressure of 90 MPa with a friction speed of 27・5 s?1. The joint efficiency increased with increasing friction time, and it reached 100% at a friction time of 1・5 s or longer. In addition, all joints fractured from the brass base metal with no cracking at the weld interface. To obtain 100% joint efficiency and the brass base metal fracture with no cracking at the weld interface, the joint should be made with opportune high friction pressure and friction time at which the entire weld interface had the transferred brass. |
| 書誌情報 |
Science and Technology of Welding and Joining
巻 14,
号 5,
p. 404-412,
発行日 2009-07
|
| DOI |
|
|
|
識別子タイプ |
DOI |
|
|
関連識別子 |
http://doi.org/10.1179/136217108X394744 |
| 出版者 |
|
|
出版者 |
Maney Publishing |
|
言語 |
en |
| 著者版フラグ |
|
|
言語 |
en |
|
値 |
author |
| 出版タイプ |
|
|
出版タイプ |
AM |
|
出版タイプResource |
http://purl.org/coar/version/c_ab4af688f83e57aa |
No07_STWJ.pdf (1.4 MB)
