@article{oai:kitami-it.repo.nii.ac.jp:00007473,
 author = {KIMURA, Masaaki and KUSAKA, Masahiro and KAIZU, Koichi and FUJI, Akiyoshi},
 issue = {2},
 journal = {Journal of Solid Mechanics and Materials Engineering},
 month = {},
 note = {This paper describes the effect of the friction welding condition on the joining phenomena and tensile strength of friction welded joint between pure copper (OFC) and low carbon steel (LCS). When the joint was made at friction pressure of 30 MPa with friction speed of 27.5 s-1 OFC transferred to the half radius region of the weld interface on the LCS sideand then transferred toward the entire weld interface. The temperatures at the centerline half radius and periphery portions on the weld interface of the LCS side were almost the same after the initial peak. When the joint was made at a friction time of 2.4 s,i.e. the friction torque was close to the initial peak, that had obtained approximately 40% joint efficiency and fractured from the weld interface with a little OFC adhering to the weld interface on the LCS side. The joint efficiency increased with increasing forge pressure, and it reached approximately 80% at a forge pressure of 180 MPa. This joint fractured at the softened OFC region adjacent to the weld interface. On the other hand, OFC transferred to the peripheral region of the weld interface on the LCS side when the joint was made at friction pressure of 90 MPa with friction speed of 27.5 s-1. However, OFC transfer was not obtained at the central region because the temperature at the periphery portion was higher than that of the other portions. The joint efficiency increased with increasing friction timeand it obtained approximately 74% at a friction time of 1.2 s. Moreover, all joints fractured between the OFC side and the weld interface, although the joints were made with higher forge pressure. To obtain higher joint efficiency and fracture in the OFC side,the joint should be made with low friction pressure and high forge pressure, and with the friction time at which the friction torque reaches the initial peak., application/pdf},
 pages = {187--198},
 title = {Effect of Friction Welding Condition on Joining Phenomena and Tensile Strength of Friction Welded joint between Pure Copper and Low Carbon Steel},
 volume = {3},
 year = {2009}
}