@article{oai:kitami-it.repo.nii.ac.jp:00006189,
 author = {北川, 武揚},
 issue = {1},
 journal = {北見工業大学研究報告},
 month = {Mar},
 note = {application/pdf, From an economic stand point, tool life is an item of major importance in metal cutting. The  temperature at the tool-chip interface （the contact surface between the tool face and the chip） is also important with regard to tool life. This paper reports the effect of tool-chip interface temperature as measured by the tool-chip thermocouple tecnique while machining the low carbon steel at cutting speed 95 m/min with a carbide tool as the contact length is successively reduced, and the discussion with measured and computed cutting temperature by M. C. Shaw’s theory. The following main conclusions were obtained ;　1） The tool-chip interface temperature decreased according to　reduction of the tool-chip contact length. The temperature difference was about 150℃ maximum to minimum. 2） The tool-chip interface temperature was lower when the tool of large rake angle was used with same cutting condition. 3） The computed temperature nearly agreed with measured temperature.},
 pages = {57--65},
 title = {工具一切屑接触長さが切削温度に及ぼす影響},
 volume = {2},
 year = {1967}
}