2022-08-08T13:26:30Zhttps://kitami-it.repo.nii.ac.jp/oaioai:kitami-it.repo.nii.ac.jp:000087012022-03-18T09:58:38Z1:86EBSD-FEMデータ変換インターフェースの構築とそれを用いたイメージベース結晶塑性解析Development of a EBSD-FEM data conversion interface and the image-based crystal plasticity analysis河野, 義樹大橋, 鉄也眞山, 剛田中, 將己坂本, 盛敬奥山, 彫夢佐藤, 満弘Kawano, YoshikiOhashi, TetsuyaMAYAMA, TsuyoshiTANAKA, MasakiSAKAMOTO, MorihiroOKUYAMA, YelmSATO, Michihiroopen accessImage-based simulationCrystal plasticity analysisEBSDData conversionCoarse grainingCrystal orientation mapsFinite element methodImage-based deformation simulation of microstructures in metals is attracting attention; however, the data conversion processes from the images of microstructures into the geometric models for the deformation simulation are now inconvenient, and there is a possibility that it prevents diffusion of the image-based simulation. In order to solve the problem, we developed an interface to convert the data of crystal orientation maps obtained by Electron Back-Scatter Diffraction (EBSD) patterns into that of geometric models for Crystal Plasticity Finite Element (CPFE) analysis. The interface incorporates several functions for data cleaning and coarse graining of the microstructures: functions to narrow down the limits of Eulerian angles presenting crystal orientations, integrate crystal grains with similar crystal orientations, eliminate small crystal grains, select representative crystal orientation in each crystal grain, and so on. The interface was applied to an orientation map of polycrystal microstructure in pure titanium, and the course-grained geometric models were successfully obtained. Image-based CPFE analysis was conducted using the geometric models with different number of finite elements. The numbers of crystal grains were assumed to be around 50 in any geometric models. A dislocation density dependent constitutive equation was employed and uniaxial tensile loading was applied to the geometric models by the forced displacement. The results showed that spatial distributions of stress, strain, and dislocation density were good agreement among geometric models with different number of elements in both elastic and plastic ranges while values of the strain and dislocation density showed quantitatively dependency of the number of elements on their distributions in the plastic ranges. These features indicate that the qualitatively similar results can be obtained using the developed interface on the condition that coarse graining of the microstructures does not occur even though the number of elements is changed.一般社団法人 日本機械学会2018jpnjournal articleAMhttps://kitami-it.repo.nii.ac.jp/records/8701https://doi.org/10.1299/transjsme.17-005592187-9761日本機械学会論文集Transactions of the JSME (in Japanese)848601700559-17-00559https://kitami-it.repo.nii.ac.jp/record/8701/files/kioron_2018_84(860).pdfapplication/pdf2.0 MB2019-06-28