2024-03-29T15:27:40Z
https://kitami-it.repo.nii.ac.jp/oai
oai:kitami-it.repo.nii.ac.jp:00007694
2022-12-13T02:21:06Z
1:86
木質バイオマスの鉄触媒炭化による流体燃料と機能性炭素の併産<特集>バイオマス転換技術-触媒の利用・開発の観点から-
Iron-Catalyzed Carbonization of Woody Biomass for Coproduction of Liquid Fuels and Functional Carbon(<Special Article>Transformation Technology of Biomass -Overview of Utilization and Development of Catalysts-
Iron-Catalyzed Carbonization of Woody Biomass for Coproduction of Liquid Fuels and Functional Carbon(<Special Article>Transformation Technology of Biomass -Overview of Utilization and Development of Catalysts-
鈴木, 勉
川上, 大輔
鈴木, 京子
服部, 和幸
open access
c 2011 一般社団法人日本エネルギー学会
本文データは学協会の許諾に基づきCiNiiから複製したものである
Wood
Iron-catalyzed carbonization
Liquid fuel
Hydrogen
Crystallized mesoporous
carbon
Wood loaded with 3% iron is carbonized at 500℃ to yield char together with liquid fuel fraction, and subsequently the 500℃-char is re-carbonized at 850℃ for obtaining both crystallized mesoporous carbon (CMC) and hydrogen-rich gas. This iron-catalyzed carbonization of wood carried out at 900℃ is evaluated in terms of fluid fuel production by comparing with corresponding 2% nickel-catalyzed and non-catalyzed carbonizations. The results showed that 3% iron loading exceeded non-loading in both the upgrading of oil and the production of hydrogen, and the effect of the former was almost equal to that of 2% nickel loading. For CMC, its post-treatments to produce practical electroconductive carbon and adsorbent for macromolecules in liquid phase are described to demonstrate the effectiveness.
一般社団法人日本エネルギー学会
2011-06
jpn
journal article
VoR
https://kitami-it.repo.nii.ac.jp/records/7694
Journal of the Japan Institute of Energy
90
6
541
546
https://kitami-it.repo.nii.ac.jp/record/7694/files/No290.pdf
application/pdf
951.5 kB
2016-11-22